keyboard_arrow_right

Rpm slash rear skid plate, black

RPM Slash Rear Skid Plate, Black

Buy rpm slash rear skid plate, black
Check Price on Amazon
Buy rpm slash rear skid plate, black from Amazon.com

Description:

RPM rear skid plates for the Traxxas Slash 2wd are designed to eliminate the frustration of broken skid plates and chassis. When a stock rear skid plate fails, it can rip the rear shock tower mounting screws out of the chassis, causing a catastrophic failure usually resulting in the rear end sailing in a different direction than the rest of the truck. With RPM skid plates mounted, that problem will be a thing of the past!

Buy rpm slash rear skid plate, black from Amazon.com
  • Designed to increase durability
  • Replaces weaker stock components
  • Proudly made in the USA

Buy rpm slash rear skid plate, black from Amazon.com


RPM Slash Front Skid Plate, Black

Buy rpm slash rear skid plate, black
Check Price on Amazon
Buy rpm slash rear skid plate, black from Amazon.com

Description:

RPM front skid plates for the Traxxas Slash 2wd are designed using the same principles we used when creating our Slash 2wd rear skid plates. Our ultimate goals were to create a front skid plate that simplified maintenance, improve durability and improve the appearance of the truck. These skid plates far exceeded those goals!

Buy rpm slash rear skid plate, black from Amazon.com
  • Designed to increase durability
  • Replaces weaker stock components
  • Proudly made in the USA
Buy rpm slash rear skid plate, black from Amazon.com


RPM Combo 2 Pack TRAXXAS Slash 4X4 Front Rear Black Bumper Set LCG Non LCG 80122 80022

Buy rpm slash rear skid plate, black
Check Price on Amazon
Buy rpm slash rear skid plate, black from Amazon.com

Description:

Condition-New RPM 80022 black front bumper with skid plate and mount plus 80122 rear black bumper with mounts for the Traxxas 1/10 4x4 Slash. These will fit the following Traxxas vehicles: 1/10 Slash 4x4, 1/10 Ultimate Slash 4x4, 1/10 Platinum Slash 4x4, and 1/10 LCG Slash 4x4. NOT for use on 2wd Slash. Front bumper includes: One front bumper One skid plate One skid plate mount Seven 4x14mm flathead screws Three 3x14mm buttonhead screws Instruction sheet Rear bumper includes: One left side bumper support One right side bumper support One rear bumper Eight 3x16mm buttonhead screws One upper bumper mount One lower bumper mount

Buy rpm slash rear skid plate, black from Amazon.com


RPM Rear Bumper or Wheelie Bar Mount Electric 2WD Slash, Rustler, Stampede, and Bandit, Black

Buy rpm slash rear skid plate, black
Check Price on Amazon
Buy rpm slash rear skid plate, black from Amazon.com

Description:

After hearing numerous requests to look into the rear bumper mount on the Traxxas Slash, we found several issues that could use the RPM touch. Those same problems were encountered on e-Rustler, e-Stampede & Bandit vehicles using the stock wheelie bar mount. The problem the stock mount uses only a single screw on the gear cover side to hold the mount in place. That causes a hinge effect under rear impacts causing the slotted area holding on to the rear skid plate to pop off after an impact, leaving the stock bumper / wheelie bar mount hanging under the chassis. The RPM solution An all-new bumper mounting system that eliminates all of the problems encountered with the stock version. The RPM rear bumper / wheelie bar mount has two mounting holes on the gear cover side and three on the motor side that's two additional mounting points to eliminate that annoying hinge effect mentioned above. The additional mounting screws help disperse impact energy into the transmission case over more surface area, reducing the possibility of damaging the case significantly! The new RPM mount design means no more slotted parts hanging below the rear skid plate ever! Our mount tucks up quite nicely behind the skid plate for better rear end ground clearance. Our rear bumper / wheelie bar mount fits a wide range of vehicles too. It fits all versions of the Traxxas Slash, electric Stampede, electric Rustler and Bandit including VXL, XL-5 and legacy versions. The RPM rear bumper / wheelie bar mount is molded in our nearly indestructible blend of nylons and is sold in either blue or black. Each mount comes with all necessary hardware, complete instructions for ease of installation and an industry-leading warranty to back it all up!.

Buy rpm slash rear skid plate, black from Amazon.com
  • Designed to increase durability
  • Replaces weaker stock components
  • Proudly made in the USA
  • The RPM Rear Bumper Mount replaces Traxxas #3677

Buy rpm slash rear skid plate, black from Amazon.com


RPM Traxxas Slash 4x4 Front Bumper and Skid Plate, Blue

Buy rpm slash rear skid plate, black
Check Price on Amazon
Buy rpm slash rear skid plate, black from Amazon.com

Description:

When Traxxas first announced the 4x4 version of the Slash, RPM customers immediately started asking us if our 2wd version parts would fit it. Sadly, that was not the case. Since then, we've been working hard to make all of those RPM parts 2wd owners love, fit on the Slash 4x4 version. Our three-piece front bumper / skid plate design for the Traxxas 4x4 is simple, yet strong, effective and highly attractive. We made it a three-piece design to give the Slash owner the option of full front-end bash-proof and crash-proof protection with the skid plate mount, skid plate and bumper installed or if they're racing, they can remove the bumper and use the skid plate mount and skid plate as a light-weight alternative bumper / skid plate that sheds 27 grams (almost a full ounce) of weight from the front end of the truck. Once the race is over, simply reinstall the bumper and full bash protection is once again available! Our Traxxas Slash 4x4 front bumper design eliminates the bumper support ring and the 4 screws behind the stock bumper while using a thicker skid design to supply the cushioning resistance a basher-proof bumper needs. By eliminating the stock bumper support ring, absolutely no frontal impact crash energy is transferred into the upper half of the differential housing. We supply longer bumper mounting screws as well, so any impact energy from down low has less of a tendency to pull the mounting screws out from the bottom half of the differential housing. With an RPM impact-absorbing front bumper installed, the energy transferred from frontal impacts will be greatly reduced as well.

Buy rpm slash rear skid plate, black from Amazon.com
  • Designed to increase durability
  • Replaces weaker stock components
  • Proudly made in the USA
Buy rpm slash rear skid plate, black from Amazon.com


Rpm slash rear skid plate, black