uxcell DC 24V 9-11RPM Worm Gear Motor 6mm Female Shaft High Torque Turbine Reducer
Our products will enhance your experience to unparalleled inspiration.
-Application: bank equipment, safe box, paper feeder, intelligent gas meter, tissue machine, accessory of automobile, ad equipment, analysis instrument, electronic game machine.
-Used in electrical appliances including remote control curtains, locks, paper shredders, copying machines, and safes Inner.
Product Name: DC Gear Motor
Rated Voltage: DC 24V
Output Speed: 9-11RPM
Motor Pins Numbe: 2
Gear Box Shaft Speed: 9-11RPM
Female Shaft Size: 6 x 14mm/ 0.24inch x 0.55inch(D*L)
Female Thread Diameter: 2.5mm/ 0.1inch
Motor Body Size: 30 x 25mm/ 1.2inch x 1inch(L*Max.D)
Gear Box Size: 45 x 30 x 25mm/ 1.8inch x 1.2inch x 1inch(L*W*T)
Main Color: Silver Gray
Main Material: Metal
1 x DC Gear Motor
- Quality Guarantee - Authentic Uxcell brand, we are the ORIGINAL, now copied by many, but they cannot match our constant improvement of quality and personal customer care. Choose a brand you can trust, by people who use their own products. Uxcell you can believe in.
- The Data You Should Notice Before Buy - Rated Voltage DC 24V; Output Speed: 11RPM; Rated Torque: 5.5kg-cm(4.8lb-in); Female Shaft Size: 6 x 14mm/ 0.24inch x 0.55inch(D*L); Female Thread Diameter: 2.5mm/ 0.1inch; Motor Body Size: 30 x 25mm/ 1.2inch x 1inch(L*Max.D); Gear Box Size: 45 x 30 x 25mm/ 1.8inch x 1.2inch x 1inch(L*W*T).
- Feature - The motor is Gear DC motor with micro-turbine worm, you can change the wiring-connection to change motor rotation. -Turbo worm geared motor with self-lock, that is, in the case of motor without electric, the output axis is fixedand self-locking. -The output shaft of the whole motor body is relatively short in the direction of normal speed reducer, and it is widely used in some situations where the installation dimension is required.
- Application - Label machines, remote control curtains, automatic voltage regulators, barbecue grills, ovens, washers, waste disposal machines, household appliances, coin machines, paper currency recognizers, automatic actuators, coffee machines, towel machines, printing machines and Stage lighting. This section is suitable for small motor configuration high speed ratio, the installation space is limited occasions, large torque output.
- What You Get - 1PCS x DC Geared Motor; if you need other voltage and rpm, pls contact us, there are many other models of this motor in store.
Orlimar Golf Escape Fairway Wood (RH) #11 Graphite Shaft - R Flex
The Orlimar escape is a Series of specialty clubs. The escape fairway woods features a shallow face height and very low center of gravity to launch the ball high and land the ball softly on the green from a wide range of distances and ground conditions. Super lightweight shafts ideal for golfers with reduced to moderate speeds. These can be mixed and Matched with the escape hybrid irons for a uniquely customized set. Head material: stainless steel/shaft: Orlimar escape graphite/grip: Orlimar custom velvet
- Shallow face height
- Low center of gravity
- Loft: 30 degrees, length: 41 inches, flex: gear will
- Shaft: Orlimar escape superlite 60 graphite
- Grip: Orlimar custom velvet
3-12VDC Gear Motor. Double Shafted Shaft Spins at 2500 Rpm Includes Removeable Shafts
This 12VDC gear motor is a new automotive seat motor that was never installed in the auto. Draws 1.3A no load, stalls at approx 9.5A and spins 2,500 rpms. Output is through 1/8" sq x 5/8" deep ports at the front and back of the housing (we'll include (2) short, square shafts to get you started). Housing measures 4-5/8" long x 1-29/32" dia with (2) shrouded power terminals at one end and (2) 3/16" dia spurs at the other. Overall, it's 5" x 2-3/4" across.
- This 12VDC gear motor is a new automotive seat motor that was never installed in the auto.
- Draws 1.3A no load, stalls at approx 9.5A and spins 2,500 rpms.
- Output is through 1/8" sq x 5/8" deep ports at the front and back of the housing (we'll include (2) short, square shafts to get you started).
- Housing measures 4-5/8" long x 1-29/32" dia with (2) shrouded power terminals at one end and (2) 3/16" dia spurs at the other. Overall, it's 5" x 2-3/4" across.
CQRobot DC 6V-12RPM Gear Motor with Metal Mounting Bracket High Torque Electric Micro Speed Reduction Geared Motor Eccentric Output Shaft 25mm Diameter Gearbox Gear Ratio 478:1
This is a 6V metal DC geared motor, 478:1 metal gear box, small size, maximum 31kg.cm torque output, stable and durable, strong and reliable! Suitable for Robots, Smart Cars, Mobile Platform Applications, Smart Homes, Banking Financial Equipment, and More.
The face plate has two mounting holes evenly spaced around the outer edge threaded for M3 screws. Its center is 17mm (0.67 inch) from the mounting hole. For DIY players to easily install or fix the motor, CQRobot has custom-made aluminum alloy metal mounting brackets.
Do not screw too far into the mounting holes as the screws can hit the gears. CQRobot Manufacturer recommends screwing no further than 2.5mm into the screw hole.
DC Geared Motor
- Rated Voltage: 6V
- Operating Voltage Range: 2V to 7.5V
- Gear Reduction Ratio: 478:1
- Gearbox "L" Length: 27mm
- "D" Shape Shaft Diameter: 4mm
- No-load Speed: 12RPM @ 6V
- No-load Current: 130mA
- Locked-Rotor Torque: 31kg.cm
- Locked-Rotor Current: 2.1A
- Weight: 85 g
- Material: Aluminum alloy
- Thickness: 3.1mm
Apply to 25mm DC geared motor
1 * 6V Metal DC Geared Motor (478:1)
1 * Aluminum Alloy Mounting Bracket Kit
- All-metal Gear, with Heat-treatment and High Hardness.
- The Carbon Brush process has a long service life and a low wear on the commutator.
- Pure Copper Enameled Wire process, thermal stability, adapt to 125 degrees high temperature environment work.
- Varistor Absorbing Electric Spark to Reduce Interference.
- Suitable for Robots, Smart Cars, Mobile Platform Applications, Smart Homes, Banking Financial Equipment, and More.
Redcat Racing M1.0 Pinion Gear for 5mm Shaft 11T
Redcat Racing M1.0 Pinion Gear for 5mm Shaft 11T. Part is compatible with TR-MT8E-BE6S. Affordable, quality replacement parts.
- Redcat racing M1.0 Pinion gear for 5mm shaft 11T
- Genuine Redcat racing Replacement parts
- Redcat racing Part #: K6602-11
- For troubleshooting and warranty information please contact a Redcat Racing Customer Service Specialist at 602-454-6445 or by emailing [email protected]
- NOTE: Please read the User Manual before use.
SODIAL(R) Silence DIY Clock Movement, 11/ 25 Inch Maximum Dial Thickness, 4/ 5 Inch Total Shaft Length
* SODIAL is a registered trademark. ONLY Authorized seller of SODIAL can sell under SODIAL listings.Our products will enhance your experience to unparalleled inspiration.
SODIAL(R) Silence DIY Clock Movement, 11/ 25 Inch Maximum Dial Thickness, 4/ 5 Inch Total Shaft Length
The quartz clock movement is applied to DIY a new clock.
And you can assemble the clock as the common clocks, and these clock parts also can work for replacing the mechanism in a broken clock.
Good helper for your life
It can work for a long time.
The clock hand can move continuously without ticking noise which does not disturb your sleeping and your work at night.
Simple design with a austere style
The clock movement kits have 3 hands, plastic washer, brass washer, brass nut, you can assemble the clock as the similar kind clocks.
The 3 clock hand is made of aluminum, and they are a little soft, you can trim the clock hands to make it to fit your clock if the hands are a bit long.
The clock movement is suitable for repairing and making a clock, and it's easy to assemble the clock which can improve your practical skills at the same time.
Note: the clock is without a hanger; Check the shaft length carefully before you buy it.
Power: 1 x 1.5 V AA battery (not included)
Case size: approx. 55 x 55 x 16 mm (2.2 x 2.2 x 0.65 inches)
Total hour hand length: approx. 90 mm
Total minute hand length: approx. 120 mm
Total second hand length: approx. 116 mm
Material: Plastic Aluminum
Package includes: 1 x Quartz clock movement
1 x Second hand
1 x Minute hand
1 x Hour hand
1 x Plastic washer
1 x Brass washer
1 x Brass nut
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.
- Clock movement with smooth sweep motion: it can move continuously, smoothly without ticking noise; Total shaft length is 20 mm (4/ 5 inches), thread length 14 mm (3/ 5 inches)
- Application: the quartz clock movement is appropriate to install in the cross-stitch, three-dimensional embroidery, craft clock, frameless draw clock, etc.
- Obvious color clock hands: the mute scanning movement contains black hour hand, black minute hand and red second hand so that you can get the time even if you stand far away from the clock
- Easy to assemble: quartz wall clock replacement movement parts have 3 hands, plastic washer, brass washer, brass nut, and you can assemble the clock as the common clocks
- Note: make sure check the size of your clock before you choose the silence DIY clock movement; Suitable for 8 - 11 mm (3/ 10 - 11/ 25 inches) thickness clock panel
SKF 14767 LDS & Small Bore Seal, R Lip Code, CRWA1 Style, Metric, 38mm Shaft Diameter, 74mm Bore Diameter, 11mm Width
METRIC M.O.D. GR
- METRIC M.O.D. GR
PFERD 67371 Polifan Zirkon Curve Radial Type Flap Disc, Zirconia Alumina, 7" Diameter, 5/8-11 Thread, 8600 RPM, 40 Grit
PFERD Polifan Special line SG-Plus curve flap disc with a premium Zirconia material that provides a combination of long service life and high stock removal rates in demanding applications. High stock removal rates through unparalleled fast, aggressive grinding and thus significant savings in labor costs. Precise and optimal grinding out of fillet welds. Pferdergonomics recommends POLIFAN-CURVE to substantially reduce vibration, noise and dust levels generated during use and to improve the working comfort. Pferdefficiency recommends POLIFAN- CURVE for long, fatigue-free and resource saving work, with perfect results in the shortest possible time. Diameter (inches): 7; 5/8-11 Thread; Grit: 40; Maximum Rotational Speed (RPM): 8600; For Fillet Weld Width: Large greater-than 5/16" (8mm); Thickness (inches): 5/8; Thickness (mm): 16; Radius Size: Large.
- Suitable for steel and stainless steel (INOX) materials
- Ideal for fillet weld grinding, chamfering, deburring, contour grinding
- Strong construction provide consistent, high quality results that are easy to achieve
- Outstanding service life
- Better control to reduce the chance of cutting into the base material
New Hot Cams Intake Camshaft For Yamaha YFZ 450 R 09 10 11 12 13 14 15 16 17, YFZ 450 X 10 11 4302-3IN
ATV Yamaha YFZ 450 R 2009ATV Yamaha YFZ 450 R 2010ATV Yamaha YFZ 450 R 2011ATV Yamaha YFZ 450 R 2012ATV Yamaha YFZ 450 R 2013ATV Yamaha YFZ 450 R 2014ATV Yamaha YFZ 450 R 2015ATV Yamaha YFZ 450 R 2016ATV Yamaha YFZ 450 R 2017ATV Yamaha YFZ 450 X 2010ATV Yamaha YFZ 450 X 2011
- ATV Yamaha YFZ 450 R 2009. ATV Yamaha YFZ 450 R 2010. ATV Yamaha YFZ 450 R 2011. ATV Yamaha YFZ 450 R 2012. ATV Yamaha YFZ 450 R 2013. ATV Yamaha YFZ 450 R 2014. ATV Yamaha YFZ 450 R 2015. ATV Yamaha YFZ 450 R 2016. ATV Yamaha YFZ 450 R 2017. ATV Yamaha YFZ 450 X 2010. ATV Yamaha YFZ 450 X 2011.
- Stage 3 ITR: Dual-cam engine: Used as a set the 4302-3IN and 4303-3EX provide the most high RPM power.
- These cams are best suited for higher speed riding applications and oversize engines.
- Uses stock valve springs.
MOVIE POSTER: SHAFT-1971-ORIGINAL 11"x14" LOBBY CARD #4-R. ROUNDTREE FN
SHAFT; original 11 x 14 duo tone lobby card. Richard Roundtree blaxploitation & crime.
- 2005 chevy impala transmission filter kit
- Zte warp n860 phones
- Derek heart juniors high neck solid tank top
- Silver nickel wall plate
- Pink torch lighter