keyboard_arrow_right

Car 500watt amp

Rockville dB12 2000w Peak / 500w RMS @ 2 Ohm CEA Compliant Mono Car Amplifier

Buy car 500watt amp
Check Price on Amazon
Buy car 500watt amp from Amazon.com

Description:

The dB12 is a class D monoblock high power amplifier with 2,000 watts peak output, 1,000 watts RMS output, and 500 watts CEA-2006 rated power. All of the mono amplifiers in the dB series are 2 ohm stable. They are all CEA-2006 compliant, which makes it easy to compare this amplifier to other CEA compliant amps on the market. Here at Rockville we offer the best value in car audio. We therefore want to make it easy for you to compare our products to any brands on the market. So we provided 3 ratings for all of our car amplifiers. We provided a CEA compliant rating, which you should use to compare this amplifier to other premium brands that make CEA compliant products such as Kicker, Rockford Fosgate, Kenwood, Pioneer, etc. We also supplied an RMS rating that is not CEA ompliant, but has become standard in the industry. You should use this rating when comparing with ratings from brands such as Hifonics, Earthquake, DB Drive, etc. Lastly, we also supply a peak rating which almost all brands in the industry provide. This peak power is the amount of power the amp puts out at the loudest moments during a particular song.

One of the tricks to determine the real power of a car amplifier is to multiply the fuse rating by 10 to determine the true RMS power. This formula almost always works within 20 . The dB12 features a Maxi fuse with a rating of 60 Amps. Although we rate these conservatively at 500 watts CEA @ 2 ohms, this amplifier puts out more power than this!

This amp has a fully adjustable 12dB/Octave crossover with differential circuitry. Other features include a subsonic filter, a fully adjustable bass equalizer, mute and delay soft start technology, a phase control switch, and a dashboard subwoofer control for added convenience. The dB12 is protected by a full IC controlled circuit and has professional peak limiter circuitry guaranteeing distortion free music playback at all levels.

Buy car 500watt amp from Amazon.com
  • Includes:Amplifier, Bass Remote. Birth sheet with tested power. Owner's manual. Mounting Screws. Warranty.
  • Rockville dB12 2000 Watt/1000w RMS Mono Class D 2 Ohm Amplifier. CEA Compliant Power Ratings (Rated at less than 1 distortion). 2 Ohm: 500 Watts x 1 Channel <1 THDN. 4 Ohm: 300 Watts x 1 Channel <1 THDN.
  • RMS Power Ratings: (Use these RMS ratings when comparing with great brands such as Hifonics, Earthquake, Soundstream, etc.). 2 Ohm: 1000 Watts x 1 Channel. 4 Ohm: 600 Watts x 1 Channel. 2 Ohm: 2000 Watts x 1 Channel. 4 Ohm: 1200 Watts x 1 Channel.
  • Designed, Engineered, Developed, and Quality Controlled in the USA. Fully Adjustable 12dB / Octave Crossover with Differential Circuitry. Low Pass Filter: 50Hz - 250Hz. Subsonic Filter: 15Hz - 55Hz. Phase Control Switch 0-180 degrees.
  • Minimum THD at Rated Power: <0.1. S / N Ratio: >90dB. Under Voltage Protection at 10V. Over Voltage Protection at 16V. Frequency Response: 15Hz - 250Hz. Damping Factor: >150 @ 100Hz. 60 Amp Maxi Fuse. Dimensions: (W x H x L) 9 x 2.4 x 13.1.







Buy car 500watt amp from Amazon.com


Polk Audio PA D2000.2 (PAD2000.2) 500W RMS PA D Series Class-D 2-channel Car Amplifier

Buy car 500watt amp
Check Price on Amazon
Buy car 500watt amp from Amazon.com

Description:

Product Features: PA D Series 2-Channel Class D Car Amplifier RMS Power Rating: 4 ohms: 125 watts x 2 chan. 2 ohms: 250 watts x 2 chan. Bridged, 4 ohms: 500 watts x 1 chan. CEA-2006 Compliant Amplifier Pulse Width Modulated MOSFET power supply Mono or 2-Channel Operation LED power (blue) and protect (red) indicators Soft start turn-on Preamp RCA outputs to daisy chain multiple amps 4-way protection circuitry (thermal, overload, reverse polarity & speaker short protection) Heavy duty aluminum alloy heat-sink Nickel-plated RCA level inputs Nickel-plated screw terminals Input sensitivity: 200mV - 6V Frequency Response: 20 - 20,000 Hz Damping Factor: >100 Total Harmonic Distortion (THD): <0.1 Signal to Noise Ration: 105 dBA Selectable crossover modes: FULL / HPF / LPF x10 Frequency Multiplier, Both Channels Variable high-pass filter: 20 - 400 Hz (x10 Capable), 12 dB/octave Variable low-pass filter: 50 - 500 Hz (x10 Capable), 12 dB/octave Fuse Rating: 25A x 2 Supply Voltage: 10V - 16V 12 AWG Speaker Connections 4 gauge OFC power and ground wiring is recommended for installation. Contact

Buy car 500watt amp from Amazon.com
  • 125 watts RMS x 2 at 4 ohms (250 watts RMS x 2 at 2 ohms)
  • 500 watts RMS x 1 in bridged mode (4-ohm stable in bridged mode)
  • Compact Size: 9"W x 1-13/16"H x 6-3/4"D
  • Nickel-plated RCA level inputs and Nickel-plated screw terminals
  • Variable high-pass filter: 20 - 400 Hz (x10 Capable), 12 dB/octave Variable low-pass filter: 50 - 500 Hz (x10 Capable), 12 dB/octave
Buy car 500watt amp from Amazon.com


Orion XTR500.4 XTR Series 500 Watts RMS 4-Channel Bridgeable Xtreme Amp Class AB Stereo High Performance Car Amplifier with FREE Alphasonik Earbuds

Buy car 500watt amp
Check Price on Amazon
Buy car 500watt amp from Amazon.com

Description:

4 Channel 500W RMS XTR Series High Performance Car Amplifier

Buy car 500watt amp from Amazon.com
  • RMS Watts @ 4 Ohms Stereo at 14.4V: 90 Watts x 4ch
  • RMS Watts @ 2 Ohms Stereo at 14.4V: 125 Watts x 4ch
  • RMS Watts @ 4 Ohms Bridge at 14.4V: 250 Watts x 2ch

Buy car 500watt amp from Amazon.com


Kicker 43DXA2504 Car Audio 4 Channel Stereo Speaker Amplifier 500W Amp DXA250.4 (Renewed)

Buy car 500watt amp
Check Price on Amazon
Buy car 500watt amp from Amazon.com

Description:

  • RMS Power Rating:
  • 4 ohms: 30 watts x 4 chan.
  • 2 ohms: 60 watts x 4 chan.
  • Max power output: 250 watts x 2 chan
  • 4/3/2 or Mono channel operation
  • Signal-to-noise ratio: >95dB
  • Built-in electronic crossover for precise speaker matching
  • FIT technology
  • Fail-Safe Integration Technology
  • Advanced circuitry for superior power, clarity and dependability
  • KickEQvariable Bass Boost (0 to 12 dB bass boost at 40 Hz)
  • Allows users to dial in the perfect sound
  • Frequency Response: 10 - 20,000 Hz
  • Variable low-pass filter (50-200 Hz, 12 dB/octave)
  • Variable high-pass filter (50-200 Hz, 12 dB/octave)
  • Variable Bass Boost: 0-12dB @ 40Hz
  • Input Sensitivity:
  • Low Level: 125mV - 5V
  • High Level: 250mV - 10V
  • Dimensions: 12-7/16"W x 7-3/16"D x 2-3/8"H
  • Buy car 500watt amp from Amazon.com
    • This Certified Refurbished product is tested and certified to look and work like new. The refurbishing process includes functionality testing, basic cleaning, inspection, and repackaging. The product ships with all relevant accessories, a minimum 90-day warranty, and may arrive in a generic box. Only select sellers who maintain a high performance bar may offer Certified Refurbished products on Amazon.com



    Buy car 500watt amp from Amazon.com


    Rockville RTB10A 10" 500w Powered Subwoofer Bass TubeBass Remote Amp Kit

    Buy car 500watt amp
    Check Price on Amazon
    Buy car 500watt amp from Amazon.com

    Description:

    Introducing the Rockville RTB10A Powered Subwoofer Enclosure. We at Rockville just had to manufacture a high quality powered bass enclosure. Growing up one of my best friends bought a car and it had a powered bass enclosure in it. The sound that it produced was just amazing and I will never forget it. & ; Features: Rockville RTB10A 10 & ; 500w Powered Subwoofer Bass enclosure With Bass Remote 500 Watts Peak/250 Watts RMS 10 & ; High power woofer in vented tubular enclosure Integrated, built-in 250 Watts RMS Rated amplifier Rear aero vent bass system Speaker level and RCA line-level input Frequency response: 30Hz-200Hz Sensitivity: 108 dB Adjustable bass crossover Dashboard adjustable bass remote control Molded steel woofer grill Four steel mounting jackets two canvas straps with Velcro fasteners Tube is covered in durable aviation grade tweed with embroidered logo Dimensions: 10. 75 & ; x 20. 86 & ; Rockville RWK10 10 Gauge 2 Channel Car Amplifier Wiring Installation Kit (1) 17 High Grade Twisted Pair of 100 Copper RCA Cable 17' 10 Gauge Translucent Blue Super Flex Power Cables 17 18 Gauge Blue Remote Cable 17 16 Gauge Clear Speaker Wire 3' 10 Gauge Clear Super Flex Ground Wire Gold Plated AGU Heat Resistant Fuse Holder 40 Amp ATU Inline Fuse 7 Split Tube Loom Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets & ; Soft passion proof insulating jacket allows for 100 improved flexibility PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F

    Buy car 500watt amp from Amazon.com
    • Rockville RTB10A 10" 500w Powered Subwoofer Bass Enclosure With Bass Remote. 500 Watts Peak/250 Watts RMS. 10" High power woofer in vented tubular enclosure. Integrated, built-in 250 Watts RMS Rated amplifier. Rear aero vent bass system
    • Speaker level and RCA line-level input. Frequency response: 30Hz-200Hz. Sensitivity: 108 db. Adjustable bass crossover. Dashboard adjustable bass remote control
    • Molded steel woofer grill. Four steel mounting jackets two canvas straps with Velcro fasteners. Tube is covered in durable aviation grade tweed with embroidered logo. Dimensions: 10. 75" x 20. 86"






    Buy car 500watt amp from Amazon.com


    Rockford Fosgate Prime R500X1D 500 Watt RMS Mono Car Class D AmplifierAmp Kit

    Buy car 500watt amp
    Check Price on Amazon
    Buy car 500watt amp from Amazon.com

    Description:

    The Prime **Rockford Fosgate R500X1D** is a 500 watt mono amplifier using efficient Class D circuit topology. This amplifier is capable of running a 2 Ohm load and includes on board Punch Bass and remote Punch Level Control. 4 Gauge amplifier installation kit is included! **We are an authorized Rockford Fosgate dealer**

    Buy car 500watt amp from Amazon.com
    • **Amplifier:**
    • New Rockford Fosgate R500X1D 500 Watt Mono D Car Amplifier
    • Rated Power:
    • 250 Watts x 1 @ 4 Ohms
    • 500 Watts x 1 @ 2 Ohms





    Buy car 500watt amp from Amazon.com


    Alpine MRV-M500 500 Watt RMS Class "D" Mono Car Amplifier Amp Kit

    Buy car 500watt amp
    Check Price on Amazon
    Buy car 500watt amp from Amazon.com

    Description:

    Features:

    Alpine MRV-M500 500 Watt Mono Block Class D Car Amplifier
    Fourth Generation V-Power Series
    500 Watt x 1 Channel At 2 Ohm
    300 Watt x 1 Channel At 4-Ohm
    Crossover Frequency (LPF): 50 - 400 Hz, -24dB/oct.
    EQ (Equalizer): 0 to 12dB, fc=50Hz
    Power Requirements: 14.4 V.DC (11-16V allowable)
    Input Sensitivity (RCA Input): 0.15 - 4.0 V
    Input Sensitivity (Speaker Level Input): 0.4 - 10 V
    Input Impedance: >10k ohms
    Frequency Response (0, -3dB: 1W into 4 Ohms) for Subwoofer: 7 -400 Hz
    Damping Factor (10W into 4 Ohms at 100Hz): >500
    Signal to Noise (1W into 4 Ohms): >85 dB
    Signal to Noise (Rated Power into 4 Ohms): >105 dB
    Remote Level: -20 to 0 dB
    Terminal Layout: Two-Sided
    Screw Mount / Wire Cover: Mounting Screw Terminals
    Amplifier Type: Class-D (Digital)
    Channel Design: 1 Channel (Mono)
    Power Supply Design: DC-DC PWM Power Supply
    Power Supply: MOSFET
    Pre-Amp Stage: Discrete
    Final Outputs: Power MOSFET
    Crossover: Variable Lowpass Filter
    Gain Control: Continuously Adjustable Gain Control
    Bass EQ: Bass EQ Function
    Bass Control: Remote Bass Control (RUX-KNOB) Ready
    Remote Turn On: Remote Sensing Function (for RCA Input & Speaker Input)
    Low-impedance Possibility:Current Protection: Over-Current, Over-Voltage, Under-Voltage and Thermal Protection
    Board Circuitry: S.T.A.R. Circuit
    Speaker-Level Inputs: 4-channel Speaker Level Inputs
    Power Indicator: LED Power Indicator
    Thermal Control: Multi-stage Power Limits
    Bridgeable Amplifier
    Includes Birthsheet For Power Verification
    40 Smaller Chassis Design With Same Power
    Class D Digital Amplifier
    Snap-On Terminal Covers For Clean Install
    Dual Internal Error Correction Tech
    Compatible With RUX-KNOB for Bass Adjustment
    Rockville RWK81 8 Gauge 2 Channel Car Amplifier Wiring Installation Kit

    Buy car 500watt amp from Amazon.com
    • 500 Watt Mono Block Class D Car Amplifier. Fourth Generation V-Power Series. 500 Watt x 1 Channel At 2 Ohm. 300 Watt x 1 Channel At 4-Ohm. Crossover Frequency (LPF): 50 - 400 Hz, -24dB/oct. EQ (Equalizer): 0 to 12dB, fc=50Hz. Power Requirements: 14.4 V.DC (11-16V allowable). Input Sensitivity (RCA Input): 0.15 - 4.0 V. Input Sensitivity (Speaker Level Input): 0.4 - 10 V
    • Input Impedance: >10k ohms. Frequency Response (0, -3dB: 1W into 4 Ohms) for Subwoofer: 7 -400 Hz. Damping Factor (10W into 4 Ohms at 100Hz): >500. Signal to Noise (1W into 4 Ohms): >85 dB. Signal to Noise (Rated Power into 4 Ohms): >105 dB. Remote Level: -20 to 0 dB. Terminal Layout: Two-Sided. Screw Mount / Wire Cover: Mounting Screw Terminals. Amplifier Type: Class-D (Digital)
    • Channel Design: 1 Channel (Mono). Power Supply Design: DC-DC PWM Power Supply. Power Supply: MOSFET. Pre-Amp Stage: Discrete. Final Outputs: Power MOSFET. Crossover: Variable Lowpass Filter. Gain Control: Continuously Adjustable Gain Control. Bass EQ: Bass EQ Function. Bass Control: Remote Bass Control (RUX-KNOB) Ready. Remote Turn On: Remote Sensing Function (for RCA Input & Speaker Input)
    • 8 Gauge 2 Channel Car Amplifier Wiring Installation Kit. (1) 17 High Grade Twisted Pair of 100 Copper RCA Cable. 17 8 Gauge Translucent Blue SuperFlex Power Cables. 17 18 Gauge Blue Remote Cable. 17 16 Gauge Clear Speaker Wire. 3 8 Gauge Clear SuperFlex Ground Wire. Gold Plated AGU Heat Resistant Fuse Holder. 60 Amp AGU Gold Plated Fuse. 7 Split Tube Loom
    • Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets. Soft abrasion proof insulating jacket allows for 100 improved flexibility. PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F


    Buy car 500watt amp from Amazon.com


    Pioneer GM-A3702 2-Channel Bridgeable Amplifier ,Black/red

    Buy car 500watt amp
    Check Price on Amazon
    Buy car 500watt amp from Amazon.com

    Description:

    2-Channel Bridgeable Amplifier. Pioneer amplifiers automatically select the proper input signal mode, either RCA or speaker level. When the receiver is turned on, the amplifier automatically turns on. When connected to an OEM receiver or a receiver without RCA output and utilizing speaker level output, the amp automatically senses the input mode and powers up in sync with the receiver. When connected to an OEM receiver or a receiver without RCA output using speaker wire, the amplifier is turned on at the same time as the receiver. Pioneer's amplifiers automatically detect the input signal and select RCA level or speaker level.

    Buy car 500watt amp from Amazon.com
    • 500 Watts Max Power
    • Automatic signal sensing and Turn-On
    • Hi-Volt input level control
    • Balanced isolator input circuit

    Buy car 500watt amp from Amazon.com


    Crunch PX-1000.2 2 Channel 1000 Watt Amp A/B Car Stereo Amplifier Wiring Kit

    Buy car 500watt amp
    Check Price on Amazon
    Buy car 500watt amp from Amazon.com

    Description:

    This **Crunch PX 1000.2 2 Channel Amplifier** is a perfect entry level amplifier for your car audio needs. It has high quality circuit and hardware designs along with exclusive technologies to improve sound quality and minimize distortion. Crunch POWERX incorporates full Class A/B technology in stereo and four channel amplifiers along with Class D in the mono. Class A/B sounds better, but the PC boards require a bit more space that in other circuit topologies. With Crunch POWERX we have trimmed away some of the more esoteric features to deliver a great amplifier that sound like you would expect Crunch to sound. The POWERX line also includes Crunch technology like QTD (Quick Thermal Dispersion) Technology which puts more aluminum on the heatsink than a normal amplifier. QTD assures the amplifiers make huge power while running very cool with nearly undetectable musical distortions. This 8 Gauge amplifier installation kit has everything you need to install your amplifier in your car. The amp kit features a 20 foot 8 gauge red power cable, competition high quality fuse holder, 3 feet of 8 gauge black ground cable, 16 feet of 18 gauge blue turn on wire, a 20 foot high performance RCA interconnect, 30 feet of speaker wire, (20) 4" wire ties, (3) rubber grommets, a #10 ring terminal, a 5/16" ring terminal, and a 1/4" ring terminal.

    Buy car 500watt amp from Amazon.com
    • Crunch PX 1000.2 2 Channel Car Amplifier
    • Power:
    • 2 Ohms: 2 x 500 watts
    • 4 Ohms: 2 x 250 watts
    • Mono Bridged @ 4 Ohms: 1 x 1000 watts









    Buy car 500watt amp from Amazon.com


    Crunch PX-1000.4 1000 Watt 4 Ch. Powerful Car Audio AmplifierAmp Wire Kit

    Buy car 500watt amp
    Check Price on Amazon
    Buy car 500watt amp from Amazon.com

    Description:

    Crunch POWERX incorporates full Class A/B technology in amplifiers. With Crunch POWERX we have trimmed away some of the more esoteric features to deliver a great amplifier that sounds like you would expect Crunch to sound. The POWERX line also includes Crunch technology like QTD (Quick Thermal Dispersion) Technology which puts more aluminum on the heatsink than a normal amplifier. QTD assures the amplifiers make huge power while running very cool with nearly undetectable musical distortions.

    Features:

    PX Crunch 1000 Watt 4-Channel Class A/B Car Amplifier
    MAX Power Rating (14.4V):
    4 ohms: 125 watts x 4 chan.
    2 ohms: 250 watts x 4 chan.
    Bridged, 4 ohms: 500 watts x 2 chan.
    RMS Power Rating:
    4 ohms: 75 watts x 4 chan.
    2 ohms: 125 watts x 4 chan.
    Bridged, 4 ohms: 250 watts x 2 chan.
    SEPP (Single Ended Push-Pull) output technology
    Pulse Width Modulated power supply
    LED power (green) and protect (red) indicators
    Slow un-mute soft start turn-on
    4, 3 or 2 channel operation
    Speaker-level inputs
    Preamp RCA outputs to daisy chain multiple amps
    3-Way System Protection circuitry (thermal, overload, and speaker short protection)
    Variable high-pass filter 120 - 3,000 Hz, 12 dB/octave
    Variable low-pass filter 50 - 250 Hz, 12 dB/octave
    Variable Bass Boost: 0 - 12 dB bass boost at 45 Hz
    Damping factor: >180
    Signal-to-nose ratio: >98dB
    Frequency response: 20 - 20,000 Hz
    Fuse rating: 30A x 2
    Dimensions: 12.6 x 10.8 x 3.7 inches
    Weight: 5.4 pounds
    Rockville RWK82 8 Gauge 4 Channel Car Amplifier Wiring Installation Kit
    (2) 17 High Grade Twisted Pair of 100 Copper RCA Cable
    17 8 Gauge Translucent Blue SuperFlex Power Cables
    17 18 Gauge Blue Remote Cable
    17 16 Gauge Clear Speaker Wire
    3 8 Gauge SuperFlex Ground Wire
    Gold Plated AGU Heat Resistant Fuse Holder

    Buy car 500watt amp from Amazon.com
    • PX Crunch 1000 Watt 4-Channel Class A/B Car Amplifier. MAX Power Rating (14.4V): 4 ohms: 125 watts x 4 chan. 2 ohms: 250 watts x 4 chan. Bridged, 4 ohms: 500 watts x 2 chan. RMS Power Rating: 4 ohms: 75 watts x 4 chan. 2 ohms: 125 watts x 4 chan. Bridged, 4 ohms: 250 watts x 2 chan. SEPP (Single Ended Push-Pull) output technology.
    • Pulse Width Modulated power supply. LED power (green) and protect (red) indicators. Slow un-mute soft start turn-on. 4, 3 or 2 channel operation. Speaker-level inputs. Preamp RCA outputs to daisy chain multiple amps. 3-Way System Protection circuitry (thermal, overload, and speaker short protection)
    • Variable high-pass filter 120 - 3,000 Hz, 12 dB/octave. Variable low-pass filter 50 - 250 Hz, 12 dB/octave. Variable Bass Boost: 0 - 12 dB bass boost at 45 Hz. Damping factor: >180. Signal-to-nose ratio: >98dB. Frequency response: 20 - 20,000 Hz. Fuse rating: 30A x 2.
    • Rockville RWK82 8 Gauge 4 Channel Car Amplifier Wiring Installation Kit. (2) 17 High Grade Twisted Pair of 100 Copper RCA Cable. 17 8 Gauge Translucent Blue SuperFlex Power Cables. 17 18 Gauge Blue Remote Cable. 17 16 Gauge Clear Speaker Wire. 3 8 Gauge SuperFlex Ground Wire. Gold Plated AGU Heat Resistant Fuse Holder. 60 Amp AGU Gold Plated Fuse. 7 Split Tube Loom.
    • Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets. Soft abrasion proof insulating jacket allows for 100 improved flexibility. PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F.








    Buy car 500watt amp from Amazon.com


    Car 500watt amp